Final year Students of B.E(Mechanical) from Babaria Institute of  Technology, Vadodara  1) Ms. Priyal Panchal   2) Ms. Komal Gohil   3) Ms. Palak Prajapati, won 3rd Prize with Cash prize of Rs. 10000/- ( Ten thousand ) in “IMAZE-18”  GUJARAT STATE  LEVEL PROJECT COMPETITION held at GCET, V V Nagar, during April 11-13, 2018  for their project titled “Advanced Technology in Laser CNC Machine” guided by Dr. Rajkumar V. Patil [ Director-Academics ], Babaria Inst. Of  Technology, Vadodara.

The 1st prize won by two groups of Mechanical Engineering Department students of batch 2013-2017 in different categories of project presentation at “Manufacturing Today Reinventing the future awards” in July-2016 held at The Gateway Taj Akota Vadodara

The group of Mechanical Engineering Department students of batch 2014-2018 are runners up in project presentation at “Manufacturing Today Reinventing the future awards” in August-2017 held at The Gateway Taj Akota Vadodara

Project model of EE Department – Selected amongst 64 best Innovations of Switch Global Expo 2016

One of the Project Model of Electrical Engineering Department is selected in Switch expo innovation Projects. It is great success for students of Bits Edu Campus as it got selected amongst 64 best projects from all over India.

Hearty Congratulations to Mr. Riyaz Patel, Mr. Ashal Patel, Mr. Aman Patel, Mr. Viren Patel, Alumni of Electrical Department who exhibited the innovation “Micropower Harvesting Using Piezoelectric Crystals Stand – Alone Adaptive Circuit” assisted by Project Guide Mr. Dattesh Joshi and Head of the department Prof.Amita Rathod.

Devang Mehta IT Award-2012

Project : Application Cloud was awarded with cash prize of 1 Lakh rupees and received 1st rank in Devang Mehta IT Award-2012. The project was prepared by Shah Anand, Aakanksha Rathod, Pradhan Mohnish, Darji Vinay. This prize was awarded by Devang Mehta foundation in association with GTU.

HEMPCREATE: ANSWER TO ECONOMY OF SUSTAINABLE CONSTRUCTION

In the last decades, sustainable aspects of human development as energy savings, comfort, and health and life- cycles have led to increased interest on new insulation materials. Moreover, the building sector represents a third of global greenhouse gas (GHG) emissions. One possible way to reduce this effect is hemp fibre concrete – hempcrete.
The project undertaken herewith is an attempt to perform various tests on hempcrete cube such as Density, Water Absorption, Compressive Strength, Thermal Conductivity and check if this material is suitable for building construction or not.

Developed by: ARPIT MISHRA, TANISHA NAIK, RITESH SHARMA, VAIDARBHI SHUKLA

USE OF NATURAL COAGULANT IN WATER TREATMENT

Aluminium sulphate (alum) is used as a common purifying agent on community as well as household levels, but its prolonged use has proved to be hazardous. Its use has been related to change the natural taste of water, with its end product left being equally harmful to the mankind as well as the environment on the broader spectrum.
The present work includes use of natural coagulant (aloe vera) is a better option to chemical coagulant in water treatment as it does not result in taste changes or leaves any adverse health effect. Aloe vera removes turbidity up to 85- 90 % turbidity from water.

Developed by: ANERY PATEL, DEV PATEL, RAVI BAHURA, ANIKET VAGHELA

WALKING CYCLE

Project is based on design and development of modification in treadmill and converts it into walking cycle. Walking cycle will give more displacement in a very less effort.
It is used to reduce the manual effort i.e. in place of conventional cycle, this walking cycle will give more displacement in a very less effort.

PATEL NIRAV, AHIRE VIRENDRA, AMIN DHRUV, BAROT HARSHAL

ADVANCE ACCIDENT PREVENTION SYSYTEM

Usually vehicle accidents are caused due to drivers who fall asleep while driving.This project monitor’s the eyes of the driver continuously while he is driving the vehicle using image processing and if the driver’s eyes are found to be closed even for a while, then immediately an android app will set an alarm in the drivers mobile.

Gajjar Rainy, Patel Manasi, Patel Vidhi

E- Institute

E- Institute is an online application that manages all the data of the institute i.e. details of faculties, students and the parents of the student connected to the institute. In this application, the teacher module includes the access for the updating of the information of the student details for their attendance, assignments.

Gunjan Shah, Shilpa Prasad, Trupti Navapariya

AUTOMATION IN OHE MAINTENANCE WITH GPS ENABLED SYSTEM.

Design an automatic system which will be continuously monitoring and measuring the specified values of height and staggering for Western Railways. The working of the system is completely automated which includes zero manual work. Also the idea of the technique leads to large amount of time saving. As the work is completely automated, the risk of electric shock to the workers measuring it manually reduces to a huge extent or can be considered as nil possibility.

Developed by: PRAVEEN S, PRIYANKA THAKKAR, RUSHY PATEL

Power Factor Correction Using SEPIC Rectifier and low cost 8051 MIcrocontroller

The main aim of power factor correction is to improve system’s overall efficiency. Here, an AC to DC converter by the name “SEPIC” has been introduced for the power factor correction. The low cost MICROCONTROLLER has been used for designing the control technique. SEPIC specifically stands for “SINGLE ENDED PRIMARY INDUCTANCE CONVERTER”. It is called “Single ENDED” as it uses only a single switch and “PRIMARY INDUCTANCE” because inductor gets charged only when the switch is on. The SEPIC rectifier is advantageous to use as it gives a non-inverted output and provides hefty transient dumping after the switch is turned off. The SEPIC is generally used in devices where the voltage can be varying from negative to positive values.

Developed by: Rajat Chudiwala, Pawan Balwani, Pranav Chaudhari

Investigation of Z – Source Inverter for Automotive Application

The Z-source inverter system can minimize stresses and size of the motor and increase output power greatly. This project presents a control of Z-source inverter for electric prolusion in auto-motives. The unique feature of the project is that the Z-source inverter is to be employed for the speed control of permanent magnet brushless dc motor (PMBL DC motor), which in turn controls the propulsion power and speed of the electric vehicle (EV).

Developed by: Mayur Sant, Manthan Saliya, Ronak Sharma, Hima Bhatt

Cost Free Power from Home-Swing

in this Project, our main aim concentration is on energy wasted by the human while swinging on a home-swing and we try to utilize this wasted energy to produce the electricity and to lift the water from the underground tank to the certain height.

Vrajesh Mehta, Snehal Prajapati, Nisarg Shah, Bhaumik Swami Mechanical Engineering

A three phase induction motor and operated it on Steinmetz Connection, conceived to allow operation of small rating motors connected to a one-phase supply and with a small degree of voltage unbalance.

Modeling of three phase motor for single phase operation

A Van de Graff generator is an electrostatic generator which uses a moving belt to accumulate very high voltages on a hollow metal globe on the top of the stand.

Van de Graff Generator

Maglev, coined for its use of magnetic levitation, is an innovative solution to the problem of transportation. This is a train unlike any super train the public has seen or ridden.

Magnetic Levitation Train (Bullet Train)

WIND HYDROGEN HYBRID SYSTEM

Home Security system using ARM 7 with RFID interface

There are lot of cases of thefts taking place even in presence of the security. Moreover accidental leakage of gas. To ensure a secure living it is important that there should be a reliable security system. A system having sensors which are interfaced with the micro controller which continuously checks for the interrupts and which causes the hooter to go off in case of there is an interrupt which may be due to an attempt of house break

Lodaya Rohan Dinesh
Gupta Sagar Pradip

AUTOMATED RAILWAY CONTROLLED SYSTEM

To avoid accidents of train with road traffic at crossing, automatic and FAIL SAFE operation of railway crossing gates is inevitable. Also, to avoid accidents between trains on the same track, automatic detection of train in forward direction is necessary. This project, presents a novel idea termed as AUTOMATED RAILWAY CONTROL SYSTEM which shall overcome all the drawbacks.

Shah Romil J
Shah Ruchit

Spy Boat

The terrorist attack on the world has left a patch of fear of death on the minds of the citizens of the world. Our project SPY – BOAT is the first step of advancement for the same which persist the imaging technology used for the detection of the terrorists and which provides us with the pictorial information that can be used to plan out the defense against the terrorism.

Shah Swapnil S
Tailor Snehal

PREPAID ENERGY METER

Large amount of electrical power is consumed daily both domestically and industrially. To facilitate billing according to consumption energy meters are used. Meters have gone through an evolution from electromechanical meters to completely digital meters with digital displays to even smart meters with two way communication between the meter and the central system allowing automatic meter reading also. Through this project we attempt to make a ‘Prepaid Energy Meter’ which has some advantages over the present post-paid meters for both the consumers and the Electricity department.

LOCATION BASED ADVERTISEMENT UPDATE USING GSM AND GPS

This project is especially helpful for local market as the local market can easily afford the marketing with such economic medium of advertisement. This project will target its consumer only when the appropriate place is near to the consumer.
“The core idea of the project is targeting customers not only with the right message at the right time, but now, in the right place.”

CHAINLESS BICYCLE

A shaft driven bicycle is a chain-less bicycle that uses a drive shaft instead of a chain to transmit power from pedals to wheels.

• Better Ground Clearance
• Compactness
• Longer Life
• Easy starting
• Increased Reliability
• Increased Safety

Technical Details

• Uses bevel gear mechanism in place of chain.
• Varying gear ratios will provide varying mechanical advantages.

PEDAL PUMP

Mechanization is a basic necessity of modern agriculture. Irrigation is the most vital input to agricultural progress. Present socio-economic condition of Indian farmers do not permit large scale investment in irrigation. Low cost, pedal operated water pumps are a solution to irrigation needs of small scale farmers.

• Used improved version of treadle pump
• Water discharge rate: 60 – 100 litres per minute
• Discharge head up to 2 m

Benefits

• Low cost
• Can be manufactured using local resources and skill
• Easy and comfortable operation
• Can also be used in semi-urban and urban areas for removing water from water logged areas for malaria prevention

HEAT TRANSFER ENHANCEMENT IN A CIRCULAR TUBE WITH THE HELP OF TWISTED PLATES

Wind energy is an abundant source of renewable energy that can be exploited for pumping water in remote locations

• Very useful in rural areas for irrigation where electricity is not available.
• Pollution free and environmental friendly power generation.
• Suitable for rural Gujarat where wind energy is available in plenty and irrigation is a primary necessity for agriculture.

Technical Details

• Vertical axis wind mill is used because they can obtain power from any direction
• Uses a reciprocating pump mechanism with gearing.

Water discharge rate: 8 Lit per Min when power generated is 1.3 Watts at a torque of 8.5 Kgf-m